How to remove a Honda Accord car stereo - (1998 to 2002)
The following is a guide on removing a car stereo or car radio from the above vehicle.
Tools and equipment required to complete the job
- Screwdriver Set
- Trim Removal Tools
Original Stereo Image for this Vehicle:
How to remove the stereo step by step:
Remove all of the screws underneath the console (Red circles)
There is a hidden screw located on the right hand side of the dash. To gain access, first carefully prise out the middle switch of the bank of 3 located under the RH air vent (headlamp load leveller) and remove the screw. There are also several clips securing the cover to the dash along its lower length which require a firm pull to release. With all the screws undone, carefully pull the trim away.
This will allow you to access the screws that hold the radio in position. There are two pairs of screws on each side.
Remove the screws, then with the radio out remove the plates that are bolted to the side of the radio.
Remove radio and disconnect aerial and ISO wiring plugs from back.
