How to remove a BMW Business Class car stereo
The following is a guide on removing a car stereo or car radio from the above vehicle.
Note
Vehicle specifications may change depending on the year of manufacture.
This guide has been created for educational purposes only, and all images are copyright of Fitaudio.com
Tools and equipment required to complete the job
- Screwdriver Set
- Trim Removal Tools
Original Stereo Image for this Vehicle:
How to remove the stereo step by step:
Start by removing the VOLUME KNOB off the left hand side of the stereo.
This should reveal a flat blade screw which you need to turn to release some catches holding the stereo in place.
You need to turn the screw and pull with your fingers on the stereo at the same time to get the lower half out.
NOTE: This screw doesn’t come all the way out and should only turn 90 degrees each way.
Once the lower half of the stereo is out, there are 2 allen key screws holding the top half in place on each side of the top stereo.
Remove radio and disconnect aerial and ISO wiring plugs from back.
