How to remove a Toyota MR2 car stereo - (2000 to 2006)
The following is a guide on removing a car stereo or car radio from the above vehicle.
Note
Vehicle specifications may change depending on the year of manufacture.
This guide has been created for educational purposes only, and all images are copyright of Fitaudio.com
Tools and equipment required to complete the job
- Screwdriver Set
- Trim Removal Tools
Original Stereo Image for this Vehicle:
How to remove the stereo step by step:
Follow the two vertical columns down either side of the stereo and prise of the silver plastic cover off carefully.
Locate the two screws holding the pillar cover in place and undo them on each side.
Remove the screws and slide the cover down and remove the trim to expose the pillar.
Next remove the heater control switches to expose two screws and undo. If you pull this piece of trim off you should now gain access to the stereo screws holding the unit in place.
Remove radio and disconnect aerial and ISO wiring plugs from back.
