How to remove a Lexus IS200 car stereo - (1999 to 2005)
The following is a guide on removing a car stereo or car radio from the above vehicle.
Note
Vehicle specifications may change depending on the year of manufacture.
This guide has been created for educational purposes only, and all images are copyright of Fitaudio.com
Tools and equipment required to complete the job
- Screwdriver Set
- Trim Removal Tools
Original Stereo Image for this Vehicle:
How to remove the stereo step by step:
Just below the top section (the sat nav in this case for this picture) there will be a small plastic cover. Gently clip it off to reveal two screws. Undo these screws.
Now lift the top section to one side, you don’t really need to remove any cabling as there should be plenty of give.
Now remove the two 8mm bolts at the top which you should now be able to see.
Pull out the bottom control unit (which is on clips as well) and you should now see two more 8mm bolts. Undo these too.
The center console including radio will now pull out.
Remove radio and disconnect aerial and ISO wiring plugs from back.
