How to remove a Toyota Supra car stereo - (1993 to 1998)
The following is a guide on removing a car stereo or car radio from the above vehicle.
Tools and equipment required to complete the job
- Screwdriver Set
- Trim Removal Tools
Original Stereo Image for this Vehicle:
How to remove the stereo step by step:
Start by removing the panel around the gear lever. This is on simple clips and should just pop up. If you can’t get it over the gear knob don’t worry as we only need it to not be attached to the center console.
Now start to remove the clock console just to the left of the speedo gauges. This is held on with popper clips. It should come off fairly easy.
This should now allow access to the main screw holding the center console surrounding the stereo in place.
You can now un-clip the centre console surrounding the stereo to allow direct access to the screws holding the stereo in place.
On each side of the stereo undo the 2 screws. This will now make the stereo loose.
Remove radio and disconnect aerial and ISO wiring plugs from back.
